# Wing & monitor setup

Source: https://help.malighting.com/grandMA2/en/help/key_window_faderwing_commandwing_setup.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
Assign wings to an executor or assign external displays to internal screens in Wing & Monitor Setup. 

**Requirements:**

- The resolution of the external screen has to be set to 1280 x 800 before assigning the internal screen to it.
- The external screen has to be calibrated before assigning the internal screen. 

For more information on how to set the resolution see [Change Screen Resolution for External Screens](/grandma2/key_window_screenoptions/#resolution_external_screen).

Open the Wing & Monitor Setup:

1. Press Setup.
2. Tap Wing & Monitor Setup in the column Console.
3. The menu **FaderWing and CommandWing** **Setup** opens in the graphic mode. 

![](/img/grandma2/menu_console-settings_wing-monitor_console_v3-3-4c87f1.png)

_Display of a current surface in grandMA2 – graphic mode_

4. To remove the write protection and to add a new screen, tap Add Surface.
5. Assign the internal screen to an external screen:\
   -Tap and hold an external screen displayed in the menu above.\
   -A pop-up opens displaying the screens. 

   ![](/img/grandma2/popup_edit-screen_wing_monitor_setup_v3-3-e7ed5a.png)

   _Assign a screen to an external screen_

   -Tap for example Screen 1.\
   -The internal screen 1 is now assigned to an external screen.
6. Tap and move an external screen to a favored position in menu.\
   -If en external screen is moved to the side, using the tracking ball or a mouse moves the cursor to the side.\
   -If an external screen is moved to the top, using the tracking ball or a mouse moves the cursor to the top.\
   -When operating a console move an external screen using a wing. Use the encoder of the wing to navigate in the screen.
7. Configure an internal or external wing:\
   -Edit the command wing displayed at the bottom of the current surface.\
   -A pop-up opens displaying the configuration.

   ![](/img/grandma2/popup_select-fader-config_v3-3-2afefe.png)

   _Configuration of wings_

   -Tap to select a wing.
8. To label the surface, tap Label on the right of the menu.
9. Change surfaces:\
   -To return to the previous surface, tap Previous Surface.\
   -To jump to the next surface, tap Next Surface.

You can also call a surface using the command line. For more information see the [Surface keyword](/grandma2/key_keyword_surface/). 

10. To delete a surface, tap Delete Surface.

The settings are now applied.

---

## Table Mode

1. To display the settings in a table, tap Table Mode on the right of the menu.
2. The menu opens.

![](/img/grandma2/menu_wing-monitor-setup_table-mode_v3-3-f2cf1d.png)

_Wing & monitor setup – table mode_

3. Add a surface:\
   -Tap Add Surface or tap and hold the cell **New** in the column **No.** or an empty cell in the column **Name**. 
4. Label the surface:\
   -After adding a surface, tap the cell **Surface**.\
   -A pop-up **Edit Name** opens. \
   -Enter the name.\
   -The surface is now labeled.
5. Apply a surface:\
   -Tap Select Surface. The cell you have tapped is now applied. 
6. Edit cells:\
   -To edit single cells, tap and hold the cell.\
   -A pop-up opens displaying the wings.\
   -Tap to select a wing.\
   -The wing you have selected is now applied. 
7. To revert to the graphic mode, tap Graphic Mode. 

All settings are now applied.